Marine VHF vs UHF CB Radios
Marine VHF and UHF CB are different radio systems designed for different uses. Marine VHF is used for maritime communication between vessels and marine stations on designated VHF channels, while UHF CB is commonly used for land-based vehicle, convoy and general UHF CB communication. They are not interchangeable, so choose the radio system intended for where you will operate.
For boating, kayaking and coastal trips, a handheld marine VHF can provide portable communication without a permanent vessel installation. The current range is focused specifically on handheld marine VHF radios rather than fixed-mount units.
3W vs 6W Handheld Marine VHF Radios
The current range includes the EcoXgear EXM300 with 3W transmit power and the EXM600 with selectable 1W, 3W and 6W output. Transmit power is one factor in radio performance, but more watts do not create a guaranteed communication distance.
The EXM600's selectable power settings give you more control over output, while the EXM300 keeps the setup simple with a 3W handheld format. Compare power alongside battery system, runtime, charging equipment and the way you expect to use the radio on the water.
Why Marine VHF Range Is Line-of-Sight Dependent
Marine VHF communication is strongly influenced by line of sight. Antenna height, the height of the other station, coastline, hills, buildings, vessels and other obstructions can all affect whether a signal gets through.
The EXM300 lists a maximum reference range of up to 10km in suitable conditions. Treat that as a favourable-condition reference rather than guaranteed coverage. The current EXM600 product information does not state a specific range, so choose it around its supported features rather than assuming a distance from its 6W maximum output.
When Selectable Transmit Power Is Useful
The EXM600 allows 1W, 3W or 6W transmit power. Selectable power can be useful when you want to match output to the communication situation while managing battery use, but the appropriate setting depends on the radio's instructions, channel procedures and operating conditions.
Learn the controls before departure so changing power does not become something you need to work out during an urgent situation.
IP67 Protection & Floating Construction
Both current models are listed with IP67 protection and floating construction. Those features suit equipment that may be exposed to spray, rain or accidental drops around boats, but an IP rating does not mean unlimited immersion or that every type of water exposure is suitable.
Use the radio as instructed, keep covers and ports secured where required, and inspect the unit before use. If water protection matters to your trip, also check the individual care instructions rather than relying on the rating alone.
Water-Activated Strobes
Both current EcoXgear marine VHF radios include a water-activated strobe. This can add a useful visibility feature if the radio enters the water, but it should not be treated as a substitute for required marine safety or distress equipment.
Battery Type, Charging & Runtime
The EXM600 uses a rechargeable lithium battery and lists up to 20 hours of battery life. It supports USB-C charging and includes a desktop charging cradle, AC power supply and 12V DC vehicle adapter.
The EXM300 uses three rechargeable AA NiMH batteries, lists up to 14 hours of battery life and includes a charging cradle, USB-C cable and USB AC adapter. Actual runtime on either model varies with transmit time, power setting, battery condition and general use.
Handheld vs Fixed-Mount Marine VHF
A handheld marine VHF is portable, can move between vessels and does not depend on a permanent radio installation. A fixed-mount marine VHF can use continuous vessel power and a higher external antenna, which can be advantageous for a dedicated boat installation.
A handheld is therefore useful as a portable primary or supplementary radio depending on the vessel and trip, but it is not automatically a direct replacement for a fixed-mount system. Choose around the vessel, operating area and communication requirements.
Channel Use & Operator Qualifications in Australia
In Australia, operators of VHF marine radio equipment need an appropriate marine radio qualification. ACMA also identifies VHF channel 16 as the calling frequency and channel 16 or 67 for distress transmissions. Learn the correct procedures before transmitting and follow current ACMA requirements for your operating area.
Distress communications have priority. A radio is much more useful when the operator already understands calling, working and distress procedures rather than trying to learn them during an emergency.
Keeping a Handheld Accessible on the Boat
Before departure, charge the radio, inspect it for damage, make sure required covers and seals are secure, and keep it somewhere that can be reached quickly. Learn the controls, power settings and channel selection before you are on the water.
Consider how the radio will be carried or secured so it remains accessible without becoming loose equipment. Follow the manufacturer's instructions for clips, accessories and storage.
Marine VHF as Part of a Broader Safety Setup
A handheld marine VHF is one communication tool, not a guarantee that a call will be received and not a substitute for safety equipment required for your vessel or operating area. Communication conditions can change, batteries can be depleted and line-of-sight limitations still apply.
Plan the broader safety setup for the trip and follow the applicable marine safety requirements for where you operate.
Cleaning, Drying & Storage
After use, follow the manufacturer's cleaning and care instructions, allow the radio and accessories to dry before storage, and inspect ports, covers and charging contacts for dirt, salt or damage. Store the radio and batteries according to the manufacturer's guidance and recharge before the next trip.
Common Marine VHF Radio Mistakes to Avoid
- Choosing a marine VHF radio only by its maximum wattage.
- Treating a quoted range such as 10km as guaranteed coverage.
- Assuming marine VHF and UHF CB radios can communicate with each other.
- Ignoring operator qualification and channel-procedure requirements.
- Assuming IP67 means unlimited immersion or no need to secure covers and ports.
- Leaving the radio discharged or inaccessible when heading onto the water.
- Waiting until an urgent situation to learn the radio controls.
- Assuming every model uses the same battery, charging system or included accessories.
- Assuming a handheld always replaces a properly installed fixed-mount marine VHF.
- Relying on a handheld radio as the only part of a marine safety plan.
Explore More Fishing & Boating Gear
For more equipment for trips on and around the water, browse Fishing & Boating Gear.
Product note: Transmit power, channel functions, listed range, IP rating, floating construction, battery type, charging method, runtime, accessory ports and included charging equipment vary by model. Check the individual product specifications and instructions before ordering or operating the radio.
Operating & safety note: Follow the radio manufacturer's instructions and current marine radio rules for your operating area. In Australia, use marine VHF only with the required operator qualification and correct channel procedures. Keep the radio charged, accessible and maintained as part of a broader marine safety setup.
Guide reviewed: August 2026.