Recovery Gear

Shop 4WD recovery gear for sand, mud, beach driving and remote touring. Compare recovery tracks, kinetic ropes, rated shackles, recovery hitches, winches, dampers, tyre deflators, jump starters and complete kits matched to your vehicle and recovery method.

Save 7%

Best seller

X-BULL 12V Wireless Winch Remote Control Kit

X-BULL 12V Wireless Winch Remote Control Kit

Regular price $35.90

Regular price ~~$38.80~~ Sale price $35.90
Best seller

4WD Recovery Kit with Tracks & Snatch Strap - X-BULL Orange

4WD Recovery Kit with Tracks & Snatch Strap - X-BULL Orange

Regular price $222.83

Regular price ~~$0.00~~ Sale price $222.83
Save 7%

Best seller

X-BULL Synthetic Winch Rope 5.5mm x 13m

X-BULL Synthetic Winch Rope 5.5mm x 13m

Regular price $35.90

Regular price ~~$38.80~~ Sale price $35.90
Save 10%

Best seller

Recovery Tracks Gen 2.0 2pc - Orange

Recovery Tracks Gen 2.0 2pc - Orange

Regular price $61.93

Regular price ~~$68.80~~ Sale price $61.93
Sold out

Best seller

5T Recovery Hitch Receiver with Bow Shackle - X-BULL

5T Recovery Hitch Receiver with Bow Shackle - X-BULL

Regular price $49.90

Regular price ~~$54.80~~ Sale price $49.90
Best seller

Carbon Offroad MegaPro Winch Hook

Carbon Offroad MegaPro Winch Hook

Regular price $95.04

Regular price Sale price $95.04
Best seller

Carbon Offroad 6000lb ATV - Small 4X4 Winch

Carbon Offroad 6000lb ATV - Small 4X4 Winch

Regular price $575.04

Regular price Sale price $575.04
Best seller

Essential 4x4 Recovery Kit

Essential 4x4 Recovery Kit

Regular price $316.80

Regular price Sale price $316.80
Save 53%

Best seller

Carbon Offroad 5000kg Kinetic Rope For Small Vehicles

Carbon Offroad 5000kg Kinetic Rope For Small Vehicles

Regular price $57.60

Regular price ~~$123.84~~ Sale price $57.60
Sold out

Best seller

Waterproof Winch Cover 2500-5000lb - X-BULL

Waterproof Winch Cover 2500-5000lb - X-BULL

Regular price $22.90

Regular price ~~$24.80~~ Sale price $22.90
Sold out

Best seller

Portable Car Jump Starter 3000A 12V

Portable Car Jump Starter 3000A 12V

Regular price $75.90

Regular price ~~$82.80~~ Sale price $75.90
Best seller

Mini Recovery Tracks 2pc - X-BULL Black

Mini Recovery Tracks 2pc - X-BULL Black

Regular price $47.80

Regular price ~~$0.00~~ Sale price $47.80
Save 8%

Best seller

X-BULL Recovery Track Mounting Pins Kit

X-BULL Recovery Track Mounting Pins Kit

Regular price $33.90

Regular price ~~$36.80~~ Sale price $33.90
Best seller

Recovery Tracks Gen 3.0 2 Pair with Carry Bag - Blue

Recovery Tracks Gen 3.0 2 Pair with Carry Bag - Blue

Regular price $187.83

Regular price ~~$0.00~~ Sale price $187.83
Best seller

Recovery Tracks Gen 3.0 2 Pair - Red

Recovery Tracks Gen 3.0 2 Pair - Red

Regular price $187.83

Regular price ~~$0.00~~ Sale price $187.83
Best seller

X-BULL Gen 3.0 Recovery Tracks Kit - Red

X-BULL Gen 3.0 Recovery Tracks Kit - Red

Regular price $105.80

Regular price ~~$0.00~~ Sale price $105.80
Recovery Tracks 2 Pair Gen 2.0 - X-BULL Black

Recovery Tracks 2 Pair Gen 2.0 - X-BULL Black

Regular price $129.83

Regular price ~~$0.00~~ Sale price $129.83
Recovery Tracks 2 Pair Gen 2.0 - X-BULL Blue

Recovery Tracks 2 Pair Gen 2.0 - X-BULL Blue

Regular price $129.83

Regular price ~~$0.00~~ Sale price $129.83
UTV & Small Vehicle Kinetic Recovery Rope

UTV & Small Vehicle Kinetic Recovery Rope

Regular price $81.60

Regular price Sale price $81.60
Large 4x4 Vehicle Kinetic Recovery Rope

Large 4x4 Vehicle Kinetic Recovery Rope

Regular price $163.20

Regular price Sale price $163.20

★★★★★

"Arrived earlier than quoted, Thank you Just Camp for the great service"

Ross

★★★★★

"Website was easy to navigate and I received my purchase promptly"

Brenda

★★★★★

"Purchased for a great price, service was excellent, postage very quick"

Lindy

★★★★★

"Great product and service A++"

Anthony

★★★★★

"My order arrived faster than expected and the quality was just as good as the big name brands"

Aaron

How to Choose 4WD Recovery Gear, Tracks, Winches & Kits

Build a Recovery System, Not Just a Bag of Gear

4WD recovery gear only works safely when every part of the system suits the vehicle, recovery method and conditions. The vehicle’s approved recovery points, the strap or rope, shackles, hitch receiver, winch, anchor and operator technique all matter. Before choosing equipment, identify the manufacturer-approved recovery points on your vehicle, consider its loaded touring mass and think about whether you are preparing for sand, mud, steep tracks, solo travel or recovery with another vehicle.

No single kit is right for every 4WD. A beach-driving setup may prioritise a shovel, tyre gauge, compressor and traction boards, while remote touring may also call for a properly installed winch, rated connectors, communications equipment and training. Choose equipment around the recovery you can perform correctly rather than buying the largest rating on the shelf.

Start with the Lowest-Force Recovery Method

When a vehicle becomes bogged, stop unnecessary wheelspin and assess the area before attaching recovery gear. Digging away built-up sand or mud, clearing the intended path and correcting tyre pressure within the vehicle and tyre manufacturer’s guidance may reduce the force needed to move the vehicle.

Where conditions allow, a shovel and recovery tracks can often be tried before a dynamic recovery. Snatch straps and kinetic ropes can generate severe forces and should only be used with suitable vehicles, approved recovery points, compatible rated equipment and competent operators. Keep passengers and bystanders well clear of the entire recovery area.

Recovery Tracks for Sand, Mud and Loose Ground

Recovery tracks, also called traction boards, are designed to create a grippy path beneath the driven tyres. Compare the board length, number of boards, material, temperature range, load specification, packed size, handles, leashes, carry bag and mounting options. A longer board can provide a more gradual path, while compact tracks are easier to store but offer less working length.

To use them, stop wheelspin, clear material from around the tyres and place the boards in the intended direction of travel according to the product instructions. Use low gear and gentle, controlled throttle. Do not spin the tyres against the boards, and keep everyone away from the front and rear of the vehicle because a board can move or eject unexpectedly. Recover and inspect the boards before packing them away.

Tow Straps, Snatch Straps and Kinetic Recovery Ropes

These products are not interchangeable. A tow strap is generally intended for steady towing or pulling with little stretch where the vehicle and local rules allow. A snatch strap or kinetic recovery rope is designed to stretch and transfer energy to a bogged vehicle. That dynamic force can make a recovery effective, but it also increases the consequences of an incorrect connection, damaged recovery point or mismatched component.

Follow the instructions for the exact strap or rope. Match the equipment to the loaded vehicles, terrain, resistance and recovery method, and make sure every connector and attachment point is compatible. Do not use a tow ball, transport tie-down point or unidentified hook as a recovery point. Do not use a strap or rope for winching, lifting or another purpose unless the manufacturer specifically approves that use.

Soft Shackles, Bow Shackles and Recovery Rings

Shackles and recovery rings connect parts of the recovery system. Soft shackles are lightweight and avoid a heavy metal pin, but they must be used only around smooth, compatible recovery points without sharp edges. Bow shackles can suit correctly designed recovery points, but the body, pin, orientation and rating must match the application.

Check whether a product rating is a working load limit, minimum breaking strength or another test value; these terms are not interchangeable. Build the system around manufacturer instructions and the weakest component rather than comparing headline numbers alone. Recovery rings and snatch blocks must also suit the rope diameter, load direction, anchorage and intended rigging configuration.

Recovery Hitch Receivers

A purpose-designed recovery hitch receiver can provide a rear connection when fitted to a compatible towbar receiver and used exactly as instructed. Confirm the receiver dimensions, pin size, shackle compatibility and rating, and check that the towbar and vehicle structure are approved for the recovery load.

A standard tow ball is not a recovery point. Dynamic loads can cause unsuitable fittings or attachment points to fail and become dangerous projectiles. Remove the towbar tongue where required and use only a recovery receiver or other manufacturer-approved rated point designed for the task.

Winches and Winch Accessories

Choosing a winch involves more than its advertised line-pull figure. Check vehicle and bullbar compatibility, mounting strength, loaded vehicle mass, expected terrain, electrical system capacity, cable sizing, battery condition, rope length and diameter, fairlead type, control system, braking design and duty cycle. The mounting system and every connector must be suitable for the winch’s maximum load.

Winch accessories may include a tree protector, extension strap, recovery ring or snatch block, rated shackles, damper, gloves and suitable anchor equipment. Avoid damaging trees; where a tree must be used and local rules permit it, use an appropriate tree protector. Plan the line before tensioning, keep it as straight as practical, protect rope from sharp edges and monitor the winch for heat and duty-cycle limits.

Synthetic Rope or Steel Cable

Synthetic winch rope is lighter and generally stores less energy than steel cable, but it can still fail dangerously. It needs protection from abrasion, sharp edges, contamination and excessive heat, and it must be paired with a compatible fairlead and drum setup.

Steel cable can tolerate some abrasive environments but is heavier, can corrode or kink and can store substantial energy under tension. Whichever line is used, inspect it regularly, use the manufacturer-specified fairlead and handling method, wear gloves and maintain a clear recovery zone.

Dampers, Exclusion Zones and Communication

All tensioned recovery equipment can fail. Use recovery dampers where instructed, but do not rely on a damper as the only control. Establish a clear exclusion zone around both vehicles, the recovery line, anchors and likely recoil paths. Nobody should stand beside, straddle or step over a tensioned rope, strap or cable.

Agree on the recovery plan and communication signals before starting. One person should coordinate the operation, both drivers should understand the signals and the recovery should stop immediately if communication is lost, equipment shifts or the load behaves unexpectedly.

Tyre Pressure and Supporting Recovery Gear

A tyre gauge, compressor and deflator are central to many sand and off-road setups. There is no universal tyre pressure for every vehicle, tyre, load and surface. Follow the vehicle and tyre manufacturer’s guidance, make gradual changes and drive more slowly when pressures are reduced. Re-inflate before returning to normal road speeds.

Other useful support equipment can include a shovel, puncture repair kit, gloves, first-aid kit, jump starter, spare parts, water and reliable communications. A jump starter helps with a compatible flat battery; it does not replace traction, towing or winching equipment. Check whether the unit matches a 12V or 24V system and the engine and battery limits listed by its manufacturer.

Complete Recovery Kits

A complete recovery kit can make storage and preparation easier, but the word ‘kit’ does not guarantee that every item suits your vehicle or intended method. Check each component individually, including its rating, material, dimensions, compatible recovery points and included instructions. Add any missing safety equipment rather than assuming the supplied bag covers every situation.

For a first setup, prioritise equipment you know how to use. Training and a simple, correctly matched recovery system are more valuable than a larger collection of unfamiliar hardware.

Inspect, Clean and Store Recovery Gear

Inspect recovery equipment before and after use. Look for cuts, broken fibres, glazing, heat damage, abrasion, chemical contamination, UV deterioration, corrosion, bent hardware, damaged threads, cracked boards, distorted pins and labels that can no longer be read. Clean and dry equipment according to the manufacturer’s instructions before storing it away from sunlight, moisture, fuel and sharp objects.

Retire equipment at the manufacturer’s stated interval or immediately after severe overload, visible damage or any event that creates doubt about its condition. Do not repair, knot, weld, drill or modify recovery equipment unless the manufacturer provides an approved procedure.

Common 4WD Recovery Mistakes to Avoid

Continuing to spin the tyres and digging the vehicle deeper before assessing the situation.
Using a tow ball, transport tie-down point or unidentified hook as a recovery point.
Mixing straps, ropes, shackles and anchors without checking that the full system is compatible.
Assuming the largest printed number automatically makes a product suitable.
Using a snatch strap or kinetic rope without competent operators and an exclusion zone.
Standing beside, stepping over or straddling a tensioned recovery line.
Using soft shackles on sharp or damaged metal edges.
Operating a winch without checking the mount, battery, wiring, fairlead and duty cycle.
Spinning tyres aggressively against recovery tracks.
Reducing tyre pressure without carrying a working gauge and compressor for re-inflation.
Packing wet, sandy or damaged straps and ropes without cleaning and inspection.
Attempting a complex recovery when professional assistance is the safer option.

Complete Your 4WD Touring Setup

Build out your recovery system with equipment from our Air Compressors & Tyre Deflators, 4WD DIY Parts and 4WD Gear & Off-Road Accessories collections, or browse the complete Camping Gear range for touring and campsite essentials.

Safety note: Vehicle recovery can cause serious injury or damage. Product ratings and specifications are supplied by the relevant manufacturer or supplier. Always follow the vehicle and equipment instructions, use manufacturer-approved recovery points, keep people clear of the recovery zone and seek trained or professional assistance when the recovery is beyond your equipment or experience.

Guide reviewed: August 2026.

What 4WD recovery gear should I carry?

There is no universal recovery kit for every vehicle or trip. A practical setup can include a shovel, tyre gauge, compressor, recovery tracks, gloves, first-aid supplies and rated recovery equipment matched to the vehicle’s manufacturer-approved recovery points. Add winching or kinetic-recovery gear only when it suits the vehicle, route and operator experience.

How do you use recovery tracks properly?

Stop wheelspin, assess a safe exit path and clear built-up sand or mud from around the tyres. Place the tracks firmly in the intended direction of travel according to their instructions, then use low gear and gentle, controlled throttle. Keep everyone clear of the front and rear of the vehicle because tracks can shift or eject, and avoid spinning the tyres against them.

Are recovery tracks better than snatch straps?

They are different recovery methods. Recovery tracks can provide a lower-force, self-recovery option in sand, mud or loose ground and are often worth trying before a dynamic recovery where conditions allow. Snatch straps and kinetic ropes require another suitable vehicle, compatible rated equipment, approved recovery points, trained operators and a clear exclusion zone.

Are recovery tracks worth it for beach driving?

Recovery tracks are a useful part of many beach-driving setups, but prevention comes first. Carry a working tyre gauge, compressor and shovel, use a suitable 4WD, check tides and conditions, and adjust tyre pressure only within vehicle and tyre manufacturer guidance. Tracks can help restore traction when used correctly, but they do not guarantee a successful recovery.

Can I use a tow ball for 4WD recovery?

No. A standard tow ball is not designed for dynamic 4WD recovery and can fail or become a dangerous projectile. Use a purpose-designed recovery hitch receiver or another manufacturer-approved rated recovery point, and follow the vehicle, towbar and recovery-equipment instructions.

Why are rated recovery points important?

Recovery loads can be severe, especially during kinetic or winch recoveries. Use only vehicle manufacturer-approved recovery points and compatible rated equipment. Transport tie-down points, tow balls and unidentified hooks are not recovery points and can fail dangerously. The full system is limited by its weakest component.

What is the difference between a tow strap, snatch strap and kinetic rope?

A tow strap is generally intended for a steady pull with little stretch. Snatch straps and kinetic ropes stretch to store and transfer energy to a bogged vehicle, creating much higher dynamic forces. They are not interchangeable, so use each product only for its stated purpose with compatible vehicles, rated points and trained operators.

How do I choose the right recovery-equipment ratings?

Follow the vehicle and equipment manufacturer’s guidance and consider the loaded vehicle mass, terrain, resistance and recovery method. Check every component, including recovery points, straps or ropes, shackles, hitches, anchors and winch hardware. Do not compare a working load limit directly with a minimum breaking strength, and avoid relying on a single blanket formula.

Do I need a winch damper with synthetic rope?

Use a recovery damper whenever the winch or rope manufacturer recommends it. Synthetic rope generally stores less energy than steel cable, but the rope, hook, shackle, anchor or recovery point can still fail dangerously. Keep a clear exclusion zone, never stand beside or step over a tensioned line, and stop if any part of the system shifts.

How often should 4WD recovery gear be inspected or replaced?

Inspect recovery gear before and after every use and at the intervals specified by the manufacturer. Look for cuts, abrasion, glazing, heat or chemical damage, broken fibres, UV deterioration, corrosion, bent hardware, damaged threads and unreadable labels. Retire equipment after severe overload, visible damage or whenever its condition is uncertain.